Alstrom Packaged Boilers

Quality Packaged Steel Boiler Systems

THREE PASS WATERBACK DESIGN

LOW PRESSURE STEAM UP TO 16 PSIG

HOT WATER UP TO 160 PSIG, 250 DEG. F

ASME SECTION IV LOW PRESSURE HEATING BOILERS CAPACITY FROM 50 TO 600 BHP

PACKAGED WITH GAS, OIL, OR COMBINATION GAS/OIL BURNERS

LARGE FURNACE VOLUME, LOW HEAT RELEASE RATE

COMPLIES WITH ASME, UL, CSD-1, & ASHRAE STANDARDS

ALSTROM BOILER SERIES

Steel scotch marine, horizontal firetube 3-Pass packaged combustion systems are manufactured for use in low pressure steam (to 15 PSIG) or hot water ( 30 to 160 PSIG, maximum 250 degrees F) applications, providing for efficient operation and low cost maintenance. Complete packaged units piped, wired and ready for years of reliable low cost maintenance and efficient operation. Packaged boiler assemblies meet ASME, UL and ASHRAE 90.1 and are available with many brands of automatic fuels burning systems.

Front and rear tubesheet access doors provide for quick and easy maintenance procedures. Furnace access accomplished through a large rear manhole door. Minimum refractory material further provides reduced maintenance, repair and/or replacement costs.

Alstrom Boilers are rated at 5 sq. ft. of fireside heating surface per boiler horsepower permitting long service life, are designed and constructed in accordance with ASME Section IV latest edition, and fully jacketed to assure high thermal efficiency utilizing 2” thick insulation material. Large furnace volume permits low heat release rate and low static pressure allow for reduced fuel burning equipment and reduced electrical horsepower requirements.

Natural or propane gas, fuel oil #2-6 and/or combination gas/oil fuel burning systems are available to suit any applicable standards, such as UL, IRI, FM, ASME CSD, and particular specification requirements.